|
Power over Ethernet Spliter TRENDnet?s TPE-102S Power over Ethernet Splitter provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain. (Version B1)Click Here to view previous version. Features IEEE 802.3af Power over Ethernet (PoE) Standard Compliant Support up to 11W at 5V DC or 12W at 12V DC Converts Non-PoE devices with Power Over Ethernet Support Advanced Auto-Sensing Algorithm enables the ability to draw power from 802.3af PSE (Power Source Equipment) Devices High Safety Standards with Short Circuit Protection Supports Power Detection and Classification Auto Disconnection for Over Voltage or Under Voltage Situation 5-Year Warranty Specifications Hardware Standard IEEE 802.3 10Base-T IEEE802.3u 100Base-TX IEEE 802.3af Power over Ethernet Network Media 10Mbps: Cat 345 Unshielded/Shielded/Screened Cable 100Mbps: Cat 5 5E 6 Unshielded/Shielded/Screened Cable Protocol CSMA/CD Topology Star Ports 1 x PoE-IN Port (Data + Power) 1 x Data-OUT Port (Data only) Switch Switch between 5V and 12V Power DC Output 5V/2.2A or 12V/1A Jumper Cable 2.5mm / 0.1? Diameter on the Connector (Center Positive) Diagnostic LEDs Power In: 48V (Green) Power Out: 5V (Green) / 12V (Amber) Power Consumption 15.4 watts (max) Temperature Operation: 0?C~40?C (32?F~ ?F) Storage: -10?C~70?C (?F~ ?F) Humidity 10%- 90% (non-condensing) Dimensions 87 x 85 x 24mm (3.425 x 3.35 x 0.95 inches) (L x W x H) Weight 156g (0.35 lb) Certification FCC CE Image Networking Solution Information provided in this document pertain to TRENDnet products and is subject to change at any time without notice. - Computer - Hardware - - 457949584
- Power over Ethernet Spliter |